Back

PinTherm Infra Connect digital room thermostat

Digital room thermostat with Modbus and Ethernet

The Pintherm Infra Connect is a digital room thermostat to switch an INFRA on/off or control high/low or modulating based on room temperature. The settings of the thermostat can be read and/or modified with Modbus or Ethernet. The thermostat can be connected to the BMS (building management system).

Features
  • Power : 230Vac / 50Hz
  • Own consumption : < 9W
  • Clock : 24 hour clock with automatic summer/winter time switching
  • Switching programs : 3 switching programs a day
  • Switching differential : 1°C
  • Dimensions : 166 x 160 x 106mm (bxwxh)
  • Weight : 880 grams
  • Protection class: IP-54
  • Installation environment:
    – Transport/storage : -20°C until +70°C
    – Operational : -10°C until +60°C
    – Relative air humidity : 0-90% not condensating
  • Switch contact(s)*:
    – Heating : 230Vac/16A (4A)
    – Others : 230Vac/10A (2,5A)
  • Temperature setting : 0 until 39°C per 1°C adjustable
  • Overtime timer : adjustable 1, 2 or 3 hours (060, 120, 180)
  • Calibration : adjustable from -3.5°C until +3.5°C
  • High/low switching : Temperature 1K, 2K, 3K or manual. Pintherm Infra Connect always starts 20 min on high a heat demand.
  • Languages : NL/EN/DE/FR/PL/RO/LT
  • Fuse : 6A
Article code
  • 0629109
Accessoires
  • External black bulb sensor (order code: 0629087)
Interested in the PinTherm Infra Connect digital room thermostat Request a quote
Contact person(Required)
Address(Required)
This field is for validation purposes and should be left unchanged.